QD400-2000 Automatic Washing Station for IBC Bin
Automatic Bin Washing Station Principle：
QD series Automatic Bin Washing Station consists of washing system, pump system, air handling system, and control system. To start to work, open the entrance door of the washing station, push the used containers such as bins, intermediate bulk containers into the station. When oriented, close the entrance door, and prepare for cleaning. Assign the working procedures (hot water, detergent, ionic water) and parameters at cleaning time, drying time according to craft requirements. After confirmed, switch on the whole system to start to work according to procedures and parameters assigned in advanced. The surfaces outside of the container are cleaned by the nozzles proportioned on the inner walls of the station; the surfaces inside of the container are cleaned by the spray nozzle with telescopic appliance. After cleaned, drying procedure works automatically Until finishing the whole work cycle. Open the exit door of the washing station, pull out the cleaned and dried container and shift it to the intermediate storage for use of the next work cycle to attain a safe production.
Automatic Bin Washing Station Usage：
QD series Automatic Bin Washing Station is mainly used in pharmaceutical industry for cleaning the containers as bins, intermediate bulk containers. It’s widely used in such areas as pharmaceutical industry, chemical industry, and foodstuff industry.
Automatic Bin Washing Station Features：
It’s made of Austenitic stainless steel. Angles are cambered. There is no dead angle, no concave/convex face and no screws on the surface. Applying the PLC control system, all parameters can be assigned in advanced according to requirements. Using QD series Automatic Washing Station to clean LD series Pharma bins or CD series Intermediate Bulk containers, has optimized producing flow and improved working efficiency.