BP-180 Alu-Alu Blister Packing Machine for Tablet & Capsule
The machine can be widely used for packing tablet, capsule, candy, gum and other solid object Alu-Alu blister packing.
1.Machine with GMP and CGMP standard, adopts PLC control system, servo motor drive control. All components that contact with medical are made of high anti-corrosive SS316.
2.Main motor uses the frequency speed adjust control.
3.Independent moulds design makes more easily assemble and disassemble.
4.Machine each station adjust by figure display control, with a independent pressing station, make the pressing and embossing more clear.
5.Alarm for Alu foil end and PVC film end and broken, with emergency stop safety device.
6.Uses the safety cover protection devices to ensure operator safety.
1.Photoelectric registration device
2.Pin-hole detection system
3.Camera vision detection system
4.Inkjet printing system
6.Chiller cooling system
|Speed||Alu/PVC：Up to 50 Cycles/min|
Alu/Alu:Up to 30 Cycles/min
|Travel range||40-110mm (freely adjusted)|
|Max. Forming Area||160×110mm|
|Max. Forming depth||12mm (20mm can be customized for option)|
|Forming foil||PVC, PVC+PVDC, PVC/aclar, ALU-ALU.etc.|
|Total power||6 kw|
|Air volume flow||≥0.2m3/min|
|Water consumption||Water cycle 20L/ minutes|