TF-80MP Tube Filler
TF-80MP Tube Filler
TF-80MP Tube Filling Machine Features:
- The tube is automatically pressed into the tube holder.
- The elastic tension type tube holder is adoped to guarantee the consistent sealing height.
- The automatic color mark adjusting systems by stepping driving tube holder is adopted for oval tubes or other special-shaped tubes.
- Adopt mechanical transmission mode filling system ensuring the stability of loading capacity.
- Original Swiss LEISTER heater is adopted .
- The internal wall of tube adopts hot air sealing and the external wall of tube adopts cooling water circulative cooling, which can beautiful sealing effect.
- The fan (made in Taiwan) is adopted to discharge the poisonous gas produced during the heating outside the room.
- After the sealing, the wind cooling system is adopted to prevent the heat from being conducted to the ointment.
- PLC automatic control system.
- Highly clearl stainless steel frame.
- The connection of emulsifier , cartoning machine and filling machine can be easily achieved.
- It is easy to operate between different sizes of tubes.
- Automatic completion of filling , sealing and batch No. printing in one machine.
- Provided such functions as automatic supply of a tube to a worktable of machine、automatic tube blowing(clearing), tube color mark automatic adjustment in a holder and automatic filling and sealing.
- Speed shall be adjustable by inverter.
- The production capacity can be realized and control automatically.
- The code mechanical hand print the code automatically in the request position.
- Human-machine interface with direct display and control.
- Tube feeding, absorbing and locating device, which is controlled by the original FESTO vacuum generator.
- Automatic detection of tube direction inversion. Omron inversion detection phototube can accurately detect the inverted tube.
- Automatic cleaning the inner tubes and the dust collecting system.
- Provided with malfunction alarm, automatic stopping device when the door is opened and mechanical overload.
- The combined material feeding forms of blow cutting and cutting can guarantee the filling of high viscosity.
- Column stylel material temperature automatic control blending system.(optional).
- Ultrasonic hopper level sensor. (optional)
- USA BANNER ultrasonic level probe combined with Siemens module can be used to accurately control material level and give direct display on the touch screen
- No tube no fill.
- Material pump. (optional)
- Water cooler(chiller). (optional)
|Plastic, Metal & compound tube
|Outer Heating & Inner Heating
|M: 35mmP: 60mm
|M: 1-150ml P: 1-250ML