CGC Series Centrifugal Granulating and Coating Machine
- Application
- Specification
CGC Series Centrifugal Granulating & Coating Machine
Put powder shaped materials into product container, and spray calculated atomizing serum, due to the bond action of serum, powder sticks with each other and then fine granules form, finally “make agglomerate” process finishes. Granules used to fill various medicinal granules and hard capsules can be made by this method.
Put the agglomerate being dried and screened out into product container, spray atomizing serum and put into powder materials pro rata, and then agglomerate zooms in layer upon layer on this base, therefore, round spheroids with high sphericity will be made after certain time. Put finished spheroids into product container, and spray calculated coating serum, therefore, even and continuous coating film forms.
This machine is composed of inlet air disposal system, mainframe system, spray system, powder charge outfit and discharge air system, etc.
- It combines the functions such as “make agglomerate”, “granulating” and “coating” in one.
- Special baffle, used to improve the moving track of materials, and enhance the rate of qualified products.
- Screw type powder feeder is set up a mixing churn-dasher, which can feed powder continuously and stably.
- Manual screw riser lifting device, localize exactly, safe and creditable.
- Touch screen +PLC control system, frequency changer regulates the rotate speed infinitely.
- Interlock safeguard is perfect.
- Only need to replace different turntable (Optional)to match with Extruder, and carry through extrusion-spheronization technical operation.
CGC Series Centrifugal Granulating & Coating Machine
Centrifugal Granulating & Coating Machine | CGC-350 | CGC-700 | CGC-1000 | |
Minimum batch charge (blank granule)(Kg) | 0.5 | 2.0 | 5.0 | |
Rated Output(blank granule)(Kg/batch) | ≤2.5 | ≤20.0 | ≤50.0 | |
Magnifying multiple | ≤2 | |||
Pill dia(Min/batch) | Φ0.25-25 | |||
Turnplate dia. (mm) | 350 | 700 | 1000 | |
Powder of mainframe(Kw) | 1.1 | 7.5 | 11 | |
Fan power(Kw) | 0.2 | 2.2 | 4 | |
Power of draft fan (Kw) | 0.2 | 1.5 | 2.2 | |
Power of electric heating(Kw) | 1.8 | 2.4 | 5.5 | |
Rotate speed(r/min) | 50-1400 | 50-1200 | 50-400 | |
Compressed air | Pressure(Mpa) | 0.4-0.6 | ||
Consumption(m3/min) | 0.3 | 0.9 | 1.1 | |
Air inlet temperature(℃) | △t=80℃,automatically adjust | |||
Noise(Db) | <60 | <60 | <60 | |
Outline dimension of mainframe(mm) | 1000*620*1700 | 1500 *900 *1300 | 1800 * 1200 * 1450 | |
Net weight(Kg) | 180 | 700 | 1800 |