HM-400 Hammer Mill

HM-400 Hammer Mill

Feature:

• The milling chamber can be dismantled via a tri-clamp.
• The safety switch does not have cable outside.
• The half round screen has as high as 40% active opening.
• Easy to clean, no outside cable.
• Easy assembly.
• Easy access of operation.
• The smallest milling size is 30um.

Advantages: 

• Bigger active sieve surface lead to higher throughput and low temperature rise.
• The good design reduce the number of the moving parts. The connection of the tri-clamps assure an easy way to assemble and dismantle the milling chamber which assure the offline sterilization;
• This means: Quick and easy cleaning and maintenance and high operational availability at lower operating costs.
• All tri-clamp assembled feeding device.
• AT rotating cylinder.
• The high speed rotor with both knife and hammer side.
• The rotor and the sieve do not have mechanical contact.
• High active opening sieve.
• The milling head can be easily dismantled.

Function:

The product goes through the feeding valve which ensures a consistent product flow to the milling chamber. Then the product is impacted by the high speed rotor and then becomes smaller particles which goes down through a screen mounting below the rotor. Customer can adjust the rotor speed and screen size to achieve required particle size distribution.

HM-400 Hammer Mill